Nimonic 75 Plate
What is Nimonic 75 Plate?
Nimonic 75 plate is a high-performance nickel-chromium alloy known for its excellent heat and oxidation resistance. It contains approximately 80% nickel and 20% chromium, along with controlled amounts of titanium and carbon, to enhance strength and stability at high temperatures. This alloy is frequently used in setting where resistance to heat and corrosion are essential. A reputable supplier of nimonic 75 plates Parag Metals supplies premium goods to satisfy the requirement of different high-temperature applications. Nimonic 75 is classified under WERKSTOFF NR. 2.4951 / 2.4630 and UNS N06075. Its chemical makeup and mechanical strength, including a tensile strength of up to 104,000 psi and yield strength of 40,000 psi, make it suitable for extreme conditions.
Table of Content
- Advantages of Nimonic 75 Plate
- Uses of Nimonic 75 Plate
- Specification of Nimonic 75 Plate
- Available Types of Nimonic 75 Plate
- Nimonic 75 Plate Equivalent Grades
- Chemical Composition Of Nimonic 75 Plate
- Nimonic 75 Plate Mechanical Properties
- Nimonic 75 Plates Size, Thickness & Weight Chart
- Application Industries of Nimonic 75 Plate
- Export Countries for Nimonic 75 Plate
These plates are frequently found in heat treatment apparatus, gas turbine engines, industrial furnaces, and aerospace components. Even at temperatures above 1000°C, Nimonic 75 plates may hold their strength and form. We provide a range of plate sizes, from 1 mm to 50 mm in thickness, and widths up to 2000 mm and lengths up to 6000 mm. Custom sizes are also available upon request. The price of a Nimonic 75 plate might vary depending on its size, thickness, and surface polish. In addition to Nimonic 75, we also provide ASTM A276 Nimonic 80 plates for increased performance needs.
Every plate we provide is put through a rigorous quality control process that includes tests for surface condition, hardness, and tensile strength. Dimensional accuracy has been confirmed to meet international requirements. Our packaging meets export specifications. Our plates are placed inside wooden crates and wrapped in plastic to avoid damage during shipping. If you’re seeking for nimonic 75 plates with consistent quality, affordable pricing, and reliable delivery, we’re here to help. If you require stock availability, bespoke orders, or technical support, get in touch with us.
Advantages of Nimonic 75 Plates
Good mechanical strength and stability under heat.
Strong corrosion and scaling resistance.
Good creep resistance in elevated temperature conditions.
Easy to fabricate and weld compared to other superalloys.
Reliable performance in thermal cycling environments.
Uses of Nimonic 75 Plates
Used in gas turbine components such as combustion chambers and heat shields
Applied in jet engine parts requiring oxidation resistance at high temperatures
Suitable for industrial furnace hardware, fixtures, and trays
Used in heat-treatment equipment exposed to continuous elevated temperatures
Applied in exhaust systems and high-temperature ducting
Specification of Nimonic 75 Plates
| Standards | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208 |
|---|---|
| Dimensions | ASTM, ASME, and API |
| Sheets Thickness | Range from .008″ to .0125″ |
| Sheets Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Plate, Sheet and Strip | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208 |
Available Types of Nimonic 75 Plates
Nimonic 75 Hot Rolled Plates
Nimonic 75 Cold Rolled Plates
Nimonic 75 Chequered Plates
Nimonic 75 Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic 75 | 2.4951 / 2.4630 | N06075 |
Chemical Composition Of Nimonic 75 Plates
| Grade | C | Mn | Si | Cu | Fe | Ni | Cr | Ti |
|---|---|---|---|---|---|---|---|---|
| Nimonic 75 | 0.08 – 0.15 | 1.0 max | 1.0 max | 0.5 max | 5.0 max | Balance | 18.0 – 21.0 | 0.2 – 0.6 |
Nimonic 75 Plates Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.37 g/cm³ | 1340 – 1380 °C | 104,000 Psi | 40,000 Psi | 42 % |
Nimonic 75 Plates Sizes
Size (in mm) | Size (in inches) |
|---|---|
3.40mm | .134″ |
3.18mm | .125″ |
4.75mm | .187″ |
3.96mm | .156″ |
7.92mm | .312″ |
6.35mm | .250″ |
12.7mm | .500″ |
9.53mm | .375″ |
19.1mm | .750″ |
15.9mm | .600″ |
25.4mm | 1″ |
22.2mm | .875″ |
31.8mm | 1.250″ |
28.6mm | 1.125″ |
44.5mm | 1.750″ |
38.1mm | 1.500″ |
63.5mm | 2.500″ |
50.8mm | 2″ |
76.2mm | 3″ |
Thickness Tolerance Chart of Nimonic 75 Plates
| Tolerance over and under nominal thickness t (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width w (mm) | 2.5<t <4.5 | 4.5<t <6.0 | 6.0<t <8.0 | 8.0<t <10.0 | 10.0<t <12.5 | 12.5<t <16.0 | 16.0<t <20.0 | 20.0<t <25.0 | 25.0<t <30.0 | 30<t <40.0 |
| w < 1200 | 0.20 | 0.23 | 0.30 | 0.32 | 0.35 | 0.80 | 0.80 | 0.80 | 1.0 | 1.4 |
| 1200< w <1500 | 0.20 | 0.25 | 0.30 | 0.35 | 0.38 | 0.80 | 0.80 | 0.90 | 1.0 | 1.4 |
| 1500< w <1800 | 0.20 | 0.28 | 0.32 | 0.38 | 0.40 | 0.80 | 0.80 | 0.90 | 1.1 | 1.5 |
| 1800< w <2100 | 0.20 | 0.30 | 0.36 | 0.40 | 0.45 | 0.80 | 0.80 | 0.90 | 1.1 | 1.5 |
| 2100< w <2400 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.90 | 1.0 | 1.1 | 1.5 | |
| 2400< w <2700 | 0.80 | 0.80 | 0.80 | 0.80 | 0.90 | 1.0 | 1.1 | 1.3 | 1.7 | |
| 2700< w <3000 | 0.80 | 0.90 | 1.0 | 1.0 | 1.0 | 1.1 | 1.3 | 1.4 | 1.8 | |
Weight Per Unit of Nimonic 75 Plates
| Weight of Hastelloy C22 Plates | Thickness in inches |
|---|---|
| 0.08 lbs/in²56.245568 kg/m² | 1/4 |
| 0.06000 lbs/in²42.184176 kg/m² | 3/16 |
| 0.161 lbs/in²113.1942056 kg/m² | 1/2 |
| 0.121 lbs/in²85.0714216 kg/m² | 3/8 |
| 0.391 lbs/in²274.9002136 kg/m² | 1 1/4 |
| 0.235 lbs/in²165.221356 kg/m² | 3/4 |
| 0.196 lbs/in²137.8016416 kg/m² | 5/8 |
| 0.313 lbs/in²220.0607848 kg/m² | 1 |
| 0.627 lbs/in²440.8246392 kg/m² | 2 |
| 0.941 lbs/in²661.5884936 kg/m² | 3 |
| 0.274 lbs/in²192.6410704 kg/m² | 7/8 |
| 0.862 lbs/in²606.0459952 kg/m² | 2 3/4 |
| 0.549 lbs/in²385.9852104 kg/m² | 1 3/4 |
| 0.47 lbs/in²330.442712 kg/m² | 1 1/2 |
| 0.784 lbs/in²551.2065664 kg/m² | 2 1/2 |
| 0.705 lbs/in²495.664068 kg/m² | 2 1/4 |
Application Industries of Nimonic 75 Plates
Export Countries for Nimonic 75 Plates
- ASIA – China, Thailand, Singapore, Sri lanka, Bangladesh, Japan, Philippines, Vietnam, Nepal, Bhutan
- Middle East – Kuwait, Dubai, Saudi Arabia, Qatar, Oman, Bahrain, Jordan
- Europe – United Kingdom, Italy, Belgium, France, Croatia, Spain, Germany, Russia, Denmark
- South America – Argentina, Chile, Brazil, Colombia, Paraguay
- Africa – Ghana, South Africa