Nimonic 75 Sheets
What is Nimonic 75 Sheets?
Nimonic 75 sheet is a high-performance sheet made of an 80/20 nickel-chromium alloy that includes titanium and carbon. It is widely used in aerospace and industrial applications due to its high resistance to heat and corrosion. Parag Metal is a reputable Nimonic 75 sheet stockist, providing high-quality products with dependable sourcing. With a melting point ranging from 1374°C to 1420°C, this sheet performs well under high temperatures and pressure conditions.
We offer nimonic alloys N07080 sheets in a variety of sizes to meet your needs. Cold rolled sheets vary in thickness from 0.5 mm to 6.4 mm, while hot rolled sheets range from 3.0 mm to 10.0 mm. The width options are 1000 mm, 1219 mm, 1500 mm, 1800 mm, and up to 3500 mm. Lengths available are 2000 mm, 2440 mm, 3000 mm, 5800 mm, and 6000 mm. Thicknesses range from 0.3 mm to 120 mm.
Table of Content
- Advantages of Nimonic 75 Sheets
- Uses of Nimonic 75 Sheets
- Specification of Nimonic 75 Sheets
- Available Types of Nimonic 75 Sheets
- Nimonic 75 Sheets Equivalent Grades
- Chemical Composition Of Nimonic 75 Sheets
- Nimonic 75 Sheets Mechanical Properties
- Nimonic 75 Sheets Size, Thickness & Weight Chart
- Application Industries of Nimonic 75 Sheets
- Export Countries for Nimonic 75 Sheets
nimonic 75 sheet, nimonic 75 sheet stockist, Nimonic Alloys N07080 Sheets
Nimonic 75 sheet is known for its high strength, oxidation resistance, and stability at elevated temperatures. It is widely used in gas turbines, heat treatment equipment, and exhaust ducts. Its ability to withstand thermal stress makes it a reliable material for many high-heat environments.
Every nimonic 75 sheet we offer goes through strict quality checks. We test for strength, durability, and heat resistance. Sheets are securely packed in wooden crates or pallets to avoid damage during transportation. Our products meet key international performance and reliability standards. Contact us to find long-lasting, tested Nimonic 75 sheets that are tailored to your project specifications.
Advantages of Nimonic 75 Sheet
- Resistant to a various range of corrosive media.
- Non-magnetic
- Excellent mechanical properties
- to chlorine ion stress corrosion cracking Virtually immune
- High strength and good weldability under a wide range of temperatures
Uses of Nimonic 75 Sheet
- Jet Engine exhaust systems
- Sour gas production tubes
- Moto exhaust systems
- Nuclear waste reprocessing equipment
- Chemical Processing
- Chimney Linings
- Aerospace equipment
Specification of Nimonic 75 Sheet
| Standards | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208 |
|---|---|
| Dimensions | ASTM, ASME, and API |
| Sheets Thickness | Range from .008″ to .0125″ |
| Sheets Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Plate, Sheet and Strip | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208 |
Available Types of Nimonic 75 Sheet
Nimonic 75 Hot Rolled Sheet
Nimonic 75 Cold Rolled Sheet
Nimonic 75 Chequered Sheet
Nimonic 75 Sheets Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Nimonic 75 | 2.4951 / 2.4630 | N06075 |
Chemical Composition Of Nimonic 75 Sheets
| Grade | C | Mn | Si | Cu | Fe | Ni | Cr | Ti |
|---|---|---|---|---|---|---|---|---|
| Nimonic 75 | 0.08 – 0.15 | 1.0 max | 1.0 max | 0.5 max | 5.0 max | Balance | 18.0 – 21.0 | 0.2 – 0.6 |
Nimonic 75 Sheets Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.37 g/cm³ | 1340 – 1380 °C | 104,000 Psi | 40,000 Psi | 42 % |
Nimonic 75 Sheets Sizes
Size (in mm) | Size (in inches) |
|---|---|
3.40mm | .134″ |
3.18mm | .125″ |
4.75mm | .187″ |
3.96mm | .156″ |
7.92mm | .312″ |
6.35mm | .250″ |
12.7mm | .500″ |
9.53mm | .375″ |
19.1mm | .750″ |
15.9mm | .600″ |
25.4mm | 1″ |
22.2mm | .875″ |
31.8mm | 1.250″ |
28.6mm | 1.125″ |
44.5mm | 1.750″ |
38.1mm | 1.500″ |
63.5mm | 2.500″ |
50.8mm | 2″ |
76.2mm | 3″ |
Thickness Tolerance Chart of Nimonic 75 Sheets
| Tolerance over and under nominal thickness t (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width w (mm) | 2.5<t <4.5 | 4.5<t <6.0 | 6.0<t <8.0 | 8.0<t <10.0 | 10.0<t <12.5 | 12.5<t <16.0 | 16.0<t <20.0 | 20.0<t <25.0 | 25.0<t <30.0 | 30<t <40.0 |
| w < 1200 | 0.20 | 0.23 | 0.30 | 0.32 | 0.35 | 0.80 | 0.80 | 0.80 | 1.0 | 1.4 |
| 1200< w <1500 | 0.20 | 0.25 | 0.30 | 0.35 | 0.38 | 0.80 | 0.80 | 0.90 | 1.0 | 1.4 |
| 1500< w <1800 | 0.20 | 0.28 | 0.32 | 0.38 | 0.40 | 0.80 | 0.80 | 0.90 | 1.1 | 1.5 |
| 1800< w <2100 | 0.20 | 0.30 | 0.36 | 0.40 | 0.45 | 0.80 | 0.80 | 0.90 | 1.1 | 1.5 |
| 2100< w <2400 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.90 | 1.0 | 1.1 | 1.5 | |
| 2400< w <2700 | 0.80 | 0.80 | 0.80 | 0.80 | 0.90 | 1.0 | 1.1 | 1.3 | 1.7 | |
| 2700< w <3000 | 0.80 | 0.90 | 1.0 | 1.0 | 1.0 | 1.1 | 1.3 | 1.4 | 1.8 | |
Weight Per Unit of Nimonic 75 Sheets
| Weight of Hastelloy C22 Plates | Thickness in inches |
|---|---|
| 0.08 lbs/in²56.245568 kg/m² | 1/4 |
| 0.06000 lbs/in²42.184176 kg/m² | 3/16 |
| 0.161 lbs/in²113.1942056 kg/m² | 1/2 |
| 0.121 lbs/in²85.0714216 kg/m² | 3/8 |
| 0.391 lbs/in²274.9002136 kg/m² | 1 1/4 |
| 0.235 lbs/in²165.221356 kg/m² | 3/4 |
| 0.196 lbs/in²137.8016416 kg/m² | 5/8 |
| 0.313 lbs/in²220.0607848 kg/m² | 1 |
| 0.627 lbs/in²440.8246392 kg/m² | 2 |
| 0.941 lbs/in²661.5884936 kg/m² | 3 |
| 0.274 lbs/in²192.6410704 kg/m² | 7/8 |
| 0.862 lbs/in²606.0459952 kg/m² | 2 3/4 |
| 0.549 lbs/in²385.9852104 kg/m² | 1 3/4 |
| 0.47 lbs/in²330.442712 kg/m² | 1 1/2 |
| 0.784 lbs/in²551.2065664 kg/m² | 2 1/2 |
| 0.705 lbs/in²495.664068 kg/m² | 2 1/4 |
Application Industries of Nimonic 75 Sheets
Export Countries for Nimonic 75 Sheets
- ASIA – China, Thailand, Singapore, Sri lanka, Bangladesh, Japan, Philippines, Vietnam, Nepal, Bhutan
- Middle East – Kuwait, Dubai, Saudi Arabia, Qatar, Oman, Bahrain, Jordan
- Europe – United Kingdom, Italy, Belgium, France, Croatia, Spain, Germany, Russia, Denmark
- South America – Argentina, Chile, Brazil, Colombia, Paraguay
- Africa – Ghana, South Africa