Rene 41 AMS 5712 Round Bar
Rene 41 AMS 5712 Round Bar
Rene 41 AMS 5712 Round Bar is a high-strength nickel-based alloy built for heat and stress. It is a precipitation-hardened, austenitic alloy that holds its strength even when temperatures climb. This makes alloy Rene 41 bar a solid choice for parts that must perform without fail in harsh conditions. AMS 5712 delivers strong creep resistance, good oxidation control, and steady mechanical strength at high heat. It also performs well at very low temperatures, which allows use across a wide thermal range. The alloy offers good ductility, so it can be machined and formed with ease before heat treatment. Once hardened, it reaches high tensile strength without losing toughness.
Rene 41 is often compared with AMS 5713, which covers similar chemistry but applies to different product forms. Both grades are widely used where heat, load, and corrosion come together. This material is common in aerospace engines, turbine parts, exhaust systems, and high-load fasteners that operate up to around 700°C. Outside aerospace, it is used in gas turbines, power plants, marine systems, and oil and gas equipment where strength and heat resistance are critical.
Rene 41 AMS 5712 Round Bars Suppliers in Mumbai, India
Parag Metals is a trusted name among Rene 41 AMS 5712 Round Bars suppliers in Mumbai, India. We stock AMS 5712 round bars in annealed and precipitation-hardened conditions and support fast supply for urgent industrial and aerospace needs. Quality control, proper certification, and consistent sizing are key strengths.
AMS 5712 Bar Specifications We Stock
| Standards : | AMS 5545, AMS 5712, AMS 5713, AMS 5800, EN 2.4973, GE B50T59, GE B50TF109, GE B50TF76, UNS N07041, Werkstoff 2.4973 |
|---|---|
| Thickness : | Range from .008″ to .0125″ |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form : | Round Bar, Wire |
| Tungsten Grades | HA 190 / HA 1925 / HA 195 / HE 390 / HE 3925 / HE 395 / HE 397 |
Export Countries for AMS 5712 Round Bar
ASIA: China, Thailand, Singapore, Sri Lanka, Bangladesh, Japan, Philippines, Vietnam, Nepal, Bhutan
Middle East: Kuwait, Dubai, Saudi Arabia, Qatar, Oman, Bahrain, Jordan
Europe: United Kingdom, Italy, Belgium, France, Croatia, Spain, Germany, Russia, Denmark
South America: Argentina, Chile, Brazil, Colombia, Paraguay
Africa: Ghana, South Africa
FAQ's
What is the specific UNS designation and primary alloy base for the Rene 41 material?
Rene 41 has the UNS designation N07041. It is a nickel-based alloy, not iron or cobalt based.
Which related AMS, EN, and Werkstoff standards are specified as equivalents or alternatives to AMS 5712 and AMS 5713?
AMS 5712 and AMS 5713 cover Rene 41 in different product forms. There is no direct EN or Werkstoff number, but Rene 41 is commonly referenced by its UNS N07041 designation.
What are the standard thickness and diameter range specifications typically stocked for AMS 5712 Round Bar?
AMS 5712 round bars are usually stocked in diameters from 6 mm to 300 mm, with custom sizes available on request.
What are the available hardness conditions for the supplied AMS 5712 Rene 41 material?
AMS 5712 Rene 41 is supplied in solution-annealed and precipitation-hardened conditions. Spring-hard forms are not typical for this grade.
What is the guaranteed maximum temperature for the high-strength and oxidation resistance performance of the AMS 5712 grade?
AMS 5712 offers reliable strength and oxidation resistance up to 700°C, making it suitable for turbine and high-heat engine parts.